Summer Starts Here - Save up to 70%
Hollywood Racks Baja 2 Trunk Bike Rack Review - 2013 Chrysler 200- Video
Today, on our 2013 Chrysler 200 we'll be test fitting the Hollywood Racks Baja two-bike rackpart number HRB2. We'll begin our test fitby placing our bike rack directly onto the trunk of our Chrysler. We'll use the levers on the side of the bike rack to adjust our top arm which also adjusts our dual arms that hold our bike. We want to make sure that our dual arms are sitting straight out or at a slight upright angle. This will determine the location of our top arm. Once we have it set correctly, we can then close the levers on the side to secure it into position. more
11/5/2013 10:00:22 AM
Thule Archway Trunk Mount Bike Rack Review - 2013 Chrysler 200- Video
Today on our 2013 Chrysler 200, we'll be test fitting the Thule Archway 2 Bike Rack part number TH9009XT. We'll place our fit dial to fit number seven according to the instructions, then we'll place the bike rack directly under the trunk of our Chrysler. We'll take our top hooks and set them into the top part of our trunk, then we'll take our side hooks and set them into the side part of our trunk and the bottom hooks at the bottom. We'll then snag down each strap by pulling on it. Once we have those snag, we can then go back around and pull each strap until it's tight and secure. Pulling them snag first keeps us from losing our position. With all the straps tight, our bike rack is secure and then we can undo the levers on the side of our carrier to swing out our dual-arms. more
11/5/2013 10:00:22 AM
Yakima QuickBack 2 Bike Rack Review - 2013 Chrysler 200- Video
Today on our 2013 Chrysler 200 well be test fitting the Yakima Quick Back Trunk Mounted 2-Bike Carrier, part number Y02621. Now to begin out test fit well set the carrier on to the vehicle. Well put the top hook to the top part of the truck, the side hooks to the side part of the trunk just above the tail lights in the bottom hook to the bottom part of the trunk. Well then tight it on the straps to secure the carrier to the vehicle. After securing the excess slack were ready to load our bike. Well loosen up the red knob on the right-hand side of the carrier to swing the cradle arms out. more
3/28/2013 2:42:12 PM
Thule Raceway Platform Trunk Bike Rack Review - 2013 Chrysler 200- Video
Today on our 2013 Chrysler 200, well be test fitting the Thule Raceway Platform-Style Trunk Mounted 2 Bike Carrier, part number TH9003. Now before we begin our test fit, well first need to refer to Thules fit guide or the included instructions to determine what number our fit dial should be at. After setting our fit dial, well place the carrier onto the vehicle. Well put the top hooks to part of the trunk and the bottom hooks to the bottom part of the trunk. Well turn the knobs on the left and right hand side of the carrier to tighten down the straps to secure the carrier to the vehicle. Once the carrier is secure, were ready to load our bike. Well raise the frame hooks and lower the platform. Well loosen up the wheel trays and slide them out and undo straps. more
3/27/2013 12:39:57 PM
Thule Raceway Trunk Bike Rack Review - 2013 Chrysler 200- Video
Today on our 2013 Chrysler 200, well be test fitting the Thule Raceway Trunk Mounted Two Bike Carrier, part number TH9001. Now before we begin our test fit well first need to refer to the Thule Fit Guide or the included instructions to determine what number our fit dial should be at. Well set our fit dial and place the carrier onto the vehicle. Well put the top hooks to the top part of the trunk and the bottom hooks to the bottom part of the trunk. Well turn the grey knob to the left and right hand side of the carrier to tighten down the straps and secure the carrier to the vehicle. Once the carrier is secured to the vehicle were ready to load our bike. more
3/27/2013 12:39:42 PM
Thule Passage Trunk Mounted Bike Rack Review - 2013 Chrysler 200- Video
Today on our 2013 Chrysler 200, well be test fitting the Thule Passage Trunk Mounted Two Bike Carrier, part number TH910XT. Now before we begin our test fit well first need to refer to the Thule Fit Guide or the included instructions to determine what number our fit dial should be at. After setting our fit dial well place the carrier onto the vehicle. Well put the top straps to the top part of the trunk, the side straps to the side part of the trunk just above the taillights, and the bottom straps to the bottom part of the trunk. Well then tighten on the straps to secure the carrier to the vehicle. After securing the excess slack were ready to load our bike. more
3/27/2013 12:39:30 PM
Thule Gateway Trunk Mount Bike Rack Review - 2013 Chrysler 200- Video
Today on our 2013 Chrysler 200 well be test fitting the Thule Gateway trunk mounted two bike carrier, part number TH9006XT. Before we begin our test fit well first need to refer to the Thule fit guide or the included instructions to determine what number our fit dial should be at. After setting our fit dial well place the carrier onto the vehicle. Well put the top hooks at the top part of the trunk, the side hooks to the side part of the trunk just above the taillights and the bottom hooks to the bottom part of the trunk. Well then tighten down the straps to secure the carrier to the vehicle. Well secure the excess slack, and were ready to load our bike. more
3/26/2013 3:33:15 PM
Thule Raceway Platform Trunk Bike Rack Review - 2013 Chrysler Town and Country- Video
Today on our 2013 Chrysler Town and Country, well be test fitting the Thule Raceway Platform-Style 2 Bike Carrier Trunk Mount, part number TH9003. Before I begin our test fit, well first need to refer to the Thule Fit Guide or the included instructions to determine the number our fit dial should be at. Well set our fit dial to 11, place the carrier onto the vehicle, put the top hooks to the top part of the trunk and the bottom hooks to the bottom part of the trunk. You may need to open up the door to get the bottom hooks in. Well then turn the dials on the left and right side of the carrier to tighten down the straps and secure it to the vehicle. Now that its secured to the vehicle, were ready to load our bike. more
2/15/2013 11:55:19 AM
Thule Raceway Trunk Bike Rack Review - 2013 Chrysler Town and Country- Video
Today on our 2013 Chrysler Town and Country, well be test fitting the Thule Raceway 2 Bike Carrier Trunk Mount, part number TH9001. Now before I begin our test fit, well first need to check the Thule Fit Guide or the included instructions to determine what number our fit dial should be at. Well set our fit dial to 11, set the carrier onto the vehicle, put the top hooks to the top part of the trunk, the bottom hooks to the bottom part of the trunk and turn the dials at the left and right side of the carrier to tighten them down. Once the carrier is secured to the vehicle, were ready to load our bike. Lift up the grey lever on the center of the carrier to swing the cradle arms out. Well position the cradle arms level or slightly angled up, well push the lever back down, securing the arms in place and well undo the straps. more
2/15/2013 11:55:16 AM
Thule Passage Trunk Mounted Bike Rack Review - 2013 Chrysler Town and Country- Video
Today on our 2013 Chrysler Town and Country, well be test fitting the Thule Passage 2 Bike Carrier, part number TH910XT. Now before I begin our test fit, well first need to check the Thule Fit Guide or the included instructions to determine the number of our fit dial. Well set our fit dial to 11 and set the carrier onto the vehicle. Well put the top hooks to the top part of the trunk, the side hooks to the side part of the trunk next to the taillights and the bottom hooks to the bottom part of the trunk. Well then tighten down the straps to secure the carrier to the vehicle. Now that its secure, were ready to load our bike. more
2/15/2013 11:55:13 AM
Thule Raceway Platform Trunk Bike Rack Review - 2005 Chrysler 300- Video
Today on our 2005 Chrysler 300 well be test fitting the Thule Raceway platform style two bike carrier, part number TH9003. To begin our test fit, weve already set up our bike rack according to the instructions found within the Raceway packaging, so well begin by placing the bike rack on top of our deck lid, making sure that the bottom rests on the bumper cover. Well then take the two cables for the top and clamp them to the deck lid just behind the rear window. Well take the two lower cables and clamp them to the deck lid, here right above the rear bumper cover. We can then ratchet down all four cables, securing our bike rack to the vehicle. With our bike rack secure well now bring out our top bar clamp and make sure that its out of the way. more
1/25/2013 1:58:45 PM
Thule Raceway Trunk Bike Rack Review - 2005 Chrysler 300- Video
Today on our 2005 Chrysler 300 well be test fitting the Thule Raceway two bike carrier, trunk mount, part number TH9001. To begin our test fit, weve already preassembled the bike rack according to the installation instructions found with the Raceway. Well place our bike rack onto the deck lid, making sure its resting on the bumper cover. Well then take the two top cables and secure them to the deck lid just behind the rear window. We can then ratchet them down using the knobs on either side of the bike rack to hold it into place. Well then do the same with the two lower cables on either side. more
1/25/2013 1:58:40 PM
Filter Videos
Filter Videos
